TQP3M9041
2300 - 6000 MHz High IP3 Dual Low Noise Amplifier
Key Features
- 2.3 - 6.0 GHz Operational Bandwidth
- Ultra low noise figure, 0.33 dB NFmin (single channel)
- High gain, 18.4 dB Gain@ 2.6 GHz
- High linearity, +20 dBm Input IP3 (balanced config)
- Integrated shut-down biasing feature
- Positive supply only needed
- Bias adjustable
- Pin compatible with 0.5 - 1.5 GHz TQP3M9039 and 1.5 - 2.3 GHz TQP3M9040
- 4x4mm 16-pin QFN package
| Mouser | 723 | Buy Online > | |
| RELL | 1118 | Buy Online > | |
| RFMW | 1621 | Buy Online > |
Qorvo's TQP3M9041 is a high linearity, ultra low noise figure dual device amplifier in a 4x4 mm package. At 1.95 GHz in a balanced configuration, the LNA provides 18.4 dB gain, 20 dBm IIP3 and 0.80 dB noise figure. The part does not require a negative supply for operation and is bias adjustable for both drain current and voltage. The device is housed in a green/RoHS-compliant industry standard QFN package.
The TQP3M9041 consists of a single monolithic GaAs E-pHEMT die and integrates bias circuitry as well as shut-down capability allowing the LNA to be useful for both FDD and TDD applications. The TQP3M9041 is optimized for the 2.4 -6.0 GHz band, but can be used outside of the band. Qorvo offers pin-compatible dual LNAs for the 0.7 - 1.0 GHz band (TQP3M9039) and 1.5 - 2.3 GHz (TQP3M9040). The balanced amplifier is optimized for high performance receivers in wireless infrastructure and can be used for base-station transceivers or tower mounted amplifiers.
Typical Applications
- 3G / 4G Wireless Infrastructure
- FDD / TDD
- Tower Mounted Amplifiers
- WCDMA / LTE
Product Categories
| Frequency Min(GHz) | 2.3 |
| Frequency Max(GHz) | 6 |
| Gain(dB) | 18.4 |
| NF(dB) | 0.8 |
| OP1dB(dBm) | 22.5 |
| OIP3(dBm) | 38.2 |
| Voltage(V) | 5 |
| Current(mA) | 57 |
| Package Type | QFN |
| Package(mm) | 4 x 4 x 0.85 |
| RoHS | Yes |
| Lead Free | Yes |
| Halogen Free | Yes |
| ITAR Restricted | No |
| ECCN | 5A991.B |
This product appears in the following application block diagrams: